2007 Suburban / GMT 900 Hitch Bolt Movement
So I am endeavoring on a long trip next weekend and decided to give the truck a good going over...and found what looks like the hitch is walking on the frame. Now I know the bumper was replaced by th...
Forum Discussion
H'mm a 2007 Burb, and the 1500 at that. I use to be a K2500 Suburban tower so your post triggered my eye.
The 2007 was the 1st year of the redesign. The receiver is an integral part of the bumper. Looks like this.
If the prior owner took the bumper off like I thought you had mentioned, then the receiver came with it and they have to take those 2 bolts out in your picture.
I can see the witness lines of there the bolts use to be however again if they had the bumper steel off, those bolts came with it. Not shocking they did not line back up exactly in the same place.
So the question now is, did they take the bumper steel off? Is so it may not have slipped, just in a different spot.
Hope this helps
John
The 2007 was the 1st year of the redesign. The receiver is an integral part of the bumper. Looks like this.
If the prior owner took the bumper off like I thought you had mentioned, then the receiver came with it and they have to take those 2 bolts out in your picture.
I can see the witness lines of there the bolts use to be however again if they had the bumper steel off, those bolts came with it. Not shocking they did not line back up exactly in the same place.
So the question now is, did they take the bumper steel off? Is so it may not have slipped, just in a different spot.
Hope this helps
John
