90 degree water supply fitting for RV toilet
Hello, I'm looking for a 90 degree fitting to connect a new Thetford toilet to a water supply pipe installed in the floor. The RV's water pipe supply pipe is made from a stiff grey plastic that's n...
Forum Discussion
What you want is a Qest fitting, available at RV parts vendors including the internet and of course ebay & Amazon. Has a grey color. For an RV toilet should have a fitting with a cone washer due to the shape of the threaded male fitting they have. I don't think anything else will seal properly except for maybe a swivel fitting. A 90 degree bend looks like in the photo. Could also install an angle stop valve so you can shut off the flow to see into the tank, which is what I did - make sure to have the water flow in the correct direction. Qest fittings don't cost much.
The 3rd photo is the Shurflo elbow from Amazon. Does not appear to have a cone washer and probably has a plain flat washer, but *might* work okay. Cost is $7.01 USD on Amazon.com or you can pay $66.55 Can + shipping right here on Amazon.ca for the same thing!!
The 3rd photo is the Shurflo elbow from Amazon. Does not appear to have a cone washer and probably has a plain flat washer, but *might* work okay. Cost is $7.01 USD on Amazon.com or you can pay $66.55 Can + shipping right here on Amazon.ca for the same thing!!
