Actual Payload of vehicles....
This thread was closed but I would like to put get some knowledge of actuals that may be of opinion or hard facts. http://forums.woodalls.com/index.cfm/fuseaction/thread/tid/28525924.cfm Im logi...
Forum Discussion
The front is IFS is it not? The actual axle housing is not weight bearing. IIRC the S-10's use a 7.2" ring gear on the front.
I would also put the the rear spring-under suspension in a weak link category.
Yes your right..
I wonder what enhanced means... LOL..
Ladder-type Frame with modified mounting points
100mm wider track (3.9 inches wider than regular S-10)
Increased ground clearance (Approx 3" over Regular S-Series 4x4)
Enhanced front (7.25" ring gear) and rear (8.5" ring gear) axles w/ 3.73:1 rear-axle ratio
Larger wheel and axle bearings
31 x 10.50" BFG A/T Tires (Pickup), 31 x 10.50" BFG Longtrails (Blazer)
46mm gas pressurized Bilstein Monotube shocks
Rear track bar (pickup), front anti-sway bar (blazer)
Skid plates
Front/rear disc brakes (1998-2005), disc/drum brakes (1994-1997)
