b and w hitch adjusting
Have a 2012 super duty and bought a 3300 companion for ford prep. Base is really snug fitting into pucks so asking did any of you with this hitch in ream or ford have to loosen the top nuts a bit to ...
Forum Discussion
On the Ford SD 6 3/4 bed, the axle center is about 41 inches back from cab. I would stay at least 40"s behind cab, with the arms back, at least until you figure out backing clearance issues. I have no problem with pin center 40"s behind cab, but every trailer will be different.
Yes, if you back/twist tight enough, you will at some point hit the cab.
Jerry
Yes, if you back/twist tight enough, you will at some point hit the cab.
Jerry
