Check this out & tell me what you think.
I noticed that the tape on the slide-out roof of our new 2018 2604ws was not adhering well. I took it to the Dealer we bought it from and had a tech look at it cause I was concerned about this area le...
Forum Discussion
Juzaxadar wrote:
I would think you could do well with Eternabond over the screws and up the side. There will be some peeling maybe, but if there is a big overlap maybe it won't be so bad. I thought most slideouts had awnings?
The fact that the current black tape has ripples in it is a little disconcerting. Any pro or semi pro should have a roller to apply this stuff.
I'm planning on removing the tape that's come unstuck. I may have to take the screws out first. Then put screws back and apply the Eternabond tape over the screws then butting it up against the vertical trim.
I'm going to clean up the area after I remove the loose tape with denatured alcohol. Hopefully that will clean up the area to be taped. I want it squeaky clean!
Final step is running a tiny bit of polyurethane caulk along the Eternabond edge and smooth it out creating a "ramp" effect for the wiper seal to glide over.
What do you think about my installation procedure?
