Equalizer L pins bent

Since going to the new style pins, my hitch noises has reduced dramatically. Not many miles on them yet but I haven't noticed any wear marks on them either. I gouged some serious groves in my old pins hence loud hitch noise.

atreis wrote:

mike54 wrote:
replace them with new style pins after I did I didn't have a problem with the L pins getting bent up.

http://www.equalizerhitch.com/store/index.php?main_page=product_info&products_id=116

Didn't know they'd re-done them... Don't you also need a new L bracket for the new pins to work?

should work with the old style brackets call them to make sure (800) 478-5578

atreis wrote:

mike54 wrote:
replace them with new style pins after I did I didn't have a problem with the L pins getting bent up.

http://www.equalizerhitch.com/store/index.php?main_page=product_info&products_id=116

Didn't know they'd re-done them... Don't you also need a new L bracket for the new pins to work?

Don't need to replace the L brakets, they work with the old L brackets. I'm going to upgrade when I get around to it.

mike54 wrote:
replace them with new style pins after I did I didn't have a problem with the L pins getting bent up.

http://www.equalizerhitch.com/store/index.php?main_page=product_info&products_id=116

Didn't know they'd re-done them... Don't you also need a new L bracket for the new pins to work?

You could just go and steal some from another TT like somebody did with mine. At least they are not that expensive to replace.

replace them with new style pins after I did I didn't have a problem with the L pins getting bent up.

http://www.equalizerhitch.com/store/index.php?main_page=product_info&products_id=116

Yes it is. Mine were beat up more than a little and I called the Equalizer company and was told that it is normal.

Here is a discussion that may explain why this happens:

http://www.rv.net/forum/index.cfm/fuseaction/thread/tid/27518850.cfm