Ramp Digger wrote:
mbopp wrote:
All my small engines get E0 (non-ethanol) gas. After I drain the tank and run the carb dry, I put some 2-stroke mix in the tank, run it through the carb, then drain the tank and run the carb dry again. The 2-stroke oil 1) has stabilizer in it and 2) I figure it keeps the carb gaskets from drying out.
I had to tear down and clean son-in-laws weedwacker carb this spring after he let it sit all winter with E10 in it. Coincidence?
I also go with non-ethanol gas and 2-stroke oil mix.The 2-stroke oil has good quality stabilizers already in it.I had an old chain saw sitting in my garage for about 5 years without being used.I noticed it one day and tried starting it,to my surprise two pulls and it started right up.
No kidding?
Learn something new every day!
Never heard of 2s oil being a fuel stabilizer not seen it marketed as such. But I typically use injector oil not pre mix in everything 2s.