Got back from our maiden voyage and spent some time on the furnace. Check the intake and discharge ducts. Found lots of saw dust in the floor ducts and even the cutout piece of plywood they didn't bother to remove. Blew out the blower wheel and intake. We made sure nothing is in front of the intake in the bathroom. The air volume is good on each discharge and I even removed the dampers on the floor grates so they don't get accidentally closed. There are only 3- 4" discharges on the furnace, pls a 2" for the basement. I did not clean the control board terminals but I will need to because it still short cycles.
