grease on TT brakes. what will happen?
I pulled my TT brake durms to inspect and repack the bearings. I was surprised to find a small amount of grease on the outside of the seal. Fortutaly there was no grease on the drum or business side o...
Forum Discussion
Yes I did replace the seal on the one inbord bearing that showed sings or leakage. I removed the bearing. Inspected and repacked it. I also removed inspected and repacked all 4 outboard bearings. All bearings were repacked by hand. That's the last time I'll do that. I'll use the cone and a grease gun from now on.
My shoes did not have grease on the business side. But a very small amount had slung out onto the inside of the shoes. But my question was what would happen if I had pumped grease into the fitting with a bad seal.
Thanks for all the help.
My shoes did not have grease on the business side. But a very small amount had slung out onto the inside of the shoes. But my question was what would happen if I had pumped grease into the fitting with a bad seal.
Thanks for all the help.
