Winged One wrote:
Go to manual mode (up and down buttons until it reads "Manual Mode").
Press enter.
Press retract (light should be lit next to retract button).
Then press front or back to retract front 2 or rear 4.
BTW, make sure your hooked up first or at least have chocks down at the tires.
Did you try this before you went to the drill?
Thank you and I did. Ended up calling a repairman and be had to jumper the relay to make it work. I guess there is a two part relay in one housing that controls the pump. The one relay for down worked fine while the other was burned out so he jumpered it and I used the control head to raise them. When I got to the new park it would not auto level but did go down. Hopefully I can get a part number on the relay and order it. Thanks for all the help and its now off to a separate issue with a slide. Rv life is ts for the weak!