Hitch receiver and shank questions
First a little background that has me wondering how other truck receivers are setup. I've searched the web and can't find any standards except for most the shanks have the pin hole 3 inches from the i...
Forum Discussion
You would think these things would be standardized.
My Ram's receiver tube is 7.25" long and the distance from the outside edge to the center of the pin is 2.5".
FWIW, my pin hole elongated a bit in the beginning (from pulling out trees :o) and then never got worse.
My Ram's receiver tube is 7.25" long and the distance from the outside edge to the center of the pin is 2.5".
FWIW, my pin hole elongated a bit in the beginning (from pulling out trees :o) and then never got worse.
