How to increase water flow AFTER the filters?

Install more powerful moter

"I probably reduced the effectiveness of eliminating the sulfur smell by removing the metal trap filter, but at least the shower can be used now."

In my experience, which may not apply to where you are, sulfur smell and stink was best removed by a carbon filter...and the further upstream, the better.

FWIW, in years gone by, I've used a 20 micron upstream filter in series with a 10 micron...and our water tested fine out of the spigot. Theoretically, it won't make a flow difference (that's what the filter makers advertise anyway) but I don't believe you need three relatively fine filters in series. I currently use a 5 (not 0.5, but 5) micron at the house and it's all good.

darleyhavidson wrote:


Interesting concept. What micron and style filters did you use? Do you have any pictures of your setup?

don't remember specifics, think it was a spun fiber one first to catch dirt, followed by a "good" (don't remember specs) one to remove bacteria and lead/etc.
I made my "connection" with PVC piping/fittings. as I recall, incoming water came into the PVC "T" which had two L fittings to the filters. it so happened that the T and Ls ended up being exactly the right distance apart to put the filters in parallel. will see if I can find the setup and take a pix. I used some quick disconnects to be able to easily assemble things.
bumpy

What will work is a large, larger the better sediment filter. They are the first to clog and cheapest to replace. Second a really good filter that gets all the nasties and metals and bugs or microbes. CW had a ten inch small diamter that would do that but now, you have to choose between metals and bugs and the filters cost more. A series of three filters with the first being for sediment and a second that gets metals and a third smal micron that gets what gets through the other two. The msot logical, sittign here and thinking right now, is a sediament filter then one good small micron carbon block filter with silver that gets all that the sediment filter doesn't get. Most sediment filters will get the chlorine too and the carbon block most certainly will.
They produce ultraviolet lamps in purification systems that kill all bugs, A tube carrying the water after filtering out everything runs around the bulb exposing it to uv.
I don't remeber distinctly but seem to remember long ago a psot about this in regards to use in an rv. Cot is the primary concern it seems...aand physical size.

darleyhavidson wrote:
Ok, I recently installed a RVwaterfilterstore.com filter system. The filter sequence is: a 1 micron sediment filter, a .5 micron carbon filter and the final one is a metal trap canister. The campground I permanently camp at has strong well water pressure (65 psi) and great flow. After I connected the filter system the water barely flows from the hose and all the fixtures in the camper have less than ideal water pressure.

So, I would like to keep the filtration system but need an increase in water flow after the filter system. How can this be achieved?

dh

Well, I tested everything. Tried without filters. Tried each one individually. Eliminated each filter one by one. Tried different hoses.

And with all that, it was the 3rd filter (the metal trap filter) in the series that was causing the most restriction of flow.

So, I removed that and installed (2) 1 micron sediment filters in series and the 3rd filter is the .5 micron charcoal filter.

I probably reduced the effectiveness of eliminating the sulfur smell by removing the metal trap filter, but at least the shower can be used now.

Thanks for all the feedback and advice.

dh

Bumpyroad wrote:

darleyhavidson wrote:

down home wrote:
............

Nothing is parallel. 3 filters in series.

and therein lies your problem. get three more filters, link them in series, and put both sets in parallel.
the first set up I tried was a dirt catcher filter followed by an effective one. got no flow rate, put two sets in parallel and worked great.
bumpy

Interesting concept. What micron and style filters did you use? Do you have any pictures of your setup?

darleyhavidson wrote:

down home wrote:
............

Nothing is parallel. 3 filters in series.

and therein lies your problem. get three more filters, link them in series, and put both sets in parallel.
the first set up I tried was a dirt catcher filter followed by an effective one. got no flow rate, put two sets in parallel and worked great.
bumpy

.5 micron?
Ok....
My diesel truck doesn’t even have .5 micron filters. Start there.

down home wrote:
............

Nothing is parallel. 3 filters in series.

............