Is this unsafe to do this?
Would anyone hitch up their breakaway cable like this? I was trying to figure out the logic behind this method, thanks. Moderator edit to re-size picture to forum limit of 640px maximum width.
Forum Discussion
Taught all my designers & engineers this:
Of course withing budget and specifications...
Most receivers are bolted to the frame rails...on ladder frame TV's
Most bumpers are bolted to the frame rails...on ladder frame TV's
Most bodies are bolted to the frame rails...on ladder frame TV's
Most things bolted on can have the bolts under torqued, not torqued, vibrate loose, etc on ladder frame TV's
Anyone guess where this goes with where I clip on my safety stuff?...
- Design it for the idiot and gorilla, as if they can misuse it...they will
- Design it for the moment Mr Murphy shows up
- KISS is the main thought process
Of course withing budget and specifications...
Most receivers are bolted to the frame rails...on ladder frame TV's
Most bumpers are bolted to the frame rails...on ladder frame TV's
Most bodies are bolted to the frame rails...on ladder frame TV's
Most things bolted on can have the bolts under torqued, not torqued, vibrate loose, etc on ladder frame TV's
Anyone guess where this goes with where I clip on my safety stuff?...
