Need advice on setting up?
Have a 22' Toyhauler I picked up and rehabbed last year http://www.rv.net/forum/index.cfm/fuseaction/thread/tid/27609229/srt/pd/pging/1/page/1.cfm I've been borrowing a 2500 to tow it with from ...
Forum Discussion
6700 lb. loaded toy hauler, 27.5 ft., 780 lb. tongue weight.
Top of wheel well to ground measurements:
..............................Front.............Rear
Unloaded..............36-1/4"..........37-1/8"
Loaded w/o WD....36-11/16"......35"
Loaded w/WD.......36-1/2"..........35-3/8"
So the front went up 7/16" with the load, and came back down 1/4" with WD, so a final rise of 3/16". 2013 Ford F150 manual says bring the front rise back down half way.
The rear sagged 2-1/8" with the load, and came back up 3/8" with the WD, so a final sag of 1-3/4".
The final setting resulted in 2-1/8" clearance between the axle and the jounce bumper.
Top of wheel well to ground measurements:
..............................Front.............Rear
Unloaded..............36-1/4"..........37-1/8"
Loaded w/o WD....36-11/16"......35"
Loaded w/WD.......36-1/2"..........35-3/8"
So the front went up 7/16" with the load, and came back down 1/4" with WD, so a final rise of 3/16". 2013 Ford F150 manual says bring the front rise back down half way.
The rear sagged 2-1/8" with the load, and came back up 3/8" with the WD, so a final sag of 1-3/4".
The final setting resulted in 2-1/8" clearance between the axle and the jounce bumper.
