โMay-31-2013 02:33 PM
โMay-31-2013 08:28 PM
โMay-31-2013 06:07 PM
downtheroad wrote:
You many have tripped the excessive flow prevention valve on the tank...
Turn the cylinder valve on very slowly and only open it about 1/4 turn. Wait several seconds. This is because there is an excess flow valve built into the connection between the the cylinder and hose. This valve is designed to sense if the hose is cut or ruptures and will significantly reduce the flow of propane in that case. By only opening it a bit, you are only letting a small amount of gas through to "charge" the line with propane. If you hear a "click" the excess flow valve activated. You need to close the cylinder valve, wait a few seconds and start over.
โMay-31-2013 05:32 PM
โMay-31-2013 03:32 PM
โMay-31-2013 03:26 PM
โMay-31-2013 03:26 PM
โMay-31-2013 03:02 PM
โMay-31-2013 02:56 PM
โMay-31-2013 02:44 PM
โMay-31-2013 02:40 PM
RatedX wrote:
Set up my TT for second time, turn on propane up front tanks but no propane anywhere in TT...did I forget to turn something on? I filled tank last week