Reese ballmount nut replacement
I rounded off the nuts getting them off my old hitch and need to replace. Do I replace with zinc plated or galvanized? Here is the Reese kit but they don't say what type they are: https://www.reese-hi...
Forum Discussion
Update, in case anyone else is in the same situation: I ended up just buying the Reese 58133 hardware replacement kit ($46 CDN on Amazon.ca).
Normal HW or Auto parts stores around here don't carry grade 8 above 1/2". I found them at a specialty fastener supplier, but they will only sell in bags, not as one offs, so by the time you look at the costs, it's about the same as getting the kit. Which also comes with the serated spacers to set the ball angle, not neccesary to replace but why not for similar price.
Normal HW or Auto parts stores around here don't carry grade 8 above 1/2". I found them at a specialty fastener supplier, but they will only sell in bags, not as one offs, so by the time you look at the costs, it's about the same as getting the kit. Which also comes with the serated spacers to set the ball angle, not neccesary to replace but why not for similar price.
