Slide topper interfering with slide seal?
I don't remember my kitchen slide not going out all the way before this year. I recently noticed when open all the way it appears to be sealed at the bottom but the top is not as tight as it should b...
Forum Discussion
donn0128 wrote:
You need to back off the slide topper tension spring maybe one turn. The slide room box is twisting due to the force. Lock the springs, take the fabric off the trailer or drop the arm off, move it out of the way, and open the slide all the way. Check. Is it sealed all around or not? If not, then your room beeds to be adjusted. If yes, then you need to reduce spring tension.
I was considering this. Not sure how, but I guess I can look it up....
What I did instead was hold the roller tube to relieve pressure while the wife operated the slide. Don't think it actually helped much, but it is a little hard to say because I wasn't inside to look at the seal.
