Slide topper interfering with slide seal?
I don't remember my kitchen slide not going out all the way before this year. I recently noticed when open all the way it appears to be sealed at the bottom but the top is not as tight as it should b...
Forum Discussion
If you can turn the roller after the slide is all the way out, then it's highly improbable that the topper is causing the slide to not extend all the way. The slide toppers should be fairly taut as that will keep the water from pooling on top.
I also think you need a second opinion, I think the first one is all wet.
I also think you need a second opinion, I think the first one is all wet.
