Tailgate to jack clearance
I have an F150 and a Rockwood Mimi Lite 2109S. Currently I have a manual jack and the tailgate does not clear the jack. My question is what are the issues involved in using a longer hitch shank? I hav...
Forum Discussion
Just now reading installation instructions for a Barker VIP 3500# jack. The instructions say the following:
IMPORTANT NOTICE: If it is necessary to change the position of the powerhead relative to the post and flange (in order to provide clearance between powerhead and LP gas bottle or LP gas cover, or more clearance between the lift gate and the powerhead) loosen set screws and rotate head without lifting off coupling. Retighten set screws when head is in desired position.
It appears to me that one could rotate the power head to the driver or passenger side to gain additional clearance for the tailgate. Can anyone confirm this for me?
THANKS!!
IMPORTANT NOTICE: If it is necessary to change the position of the powerhead relative to the post and flange (in order to provide clearance between powerhead and LP gas bottle or LP gas cover, or more clearance between the lift gate and the powerhead) loosen set screws and rotate head without lifting off coupling. Retighten set screws when head is in desired position.
It appears to me that one could rotate the power head to the driver or passenger side to gain additional clearance for the tailgate. Can anyone confirm this for me?
THANKS!!
