cancel
Showing results forย 
Search instead forย 
Did you mean:ย 

Upgrade to 5th wheel

Taxman2436
Explorer
Explorer
I have a 2019 Ford F-250 6.7l diesel. Iโ€™m looking at a Grand Design 320MKS but want to make sure my truck can haul it. According to the brochure the trailer is 10,721 UVW. According to Fords towing guide the truck will tow 14,800 lbs. Iโ€™m thinking that if it will I may need to beef up the rear suspension. Also, Iโ€™m not sure how โ€œUVWโ€ relates to the actual weight I will be towing. Also looking for hitch recommendations.
Thanks for any help provided.

Lenny
Taxman2436
Sturbridge, MA
2022 Ford F350 6.7L Diesel
2023 Grand Design Reflection 320 MKS
50 REPLIES 50

Lantley
Nomad
Nomad
Cummins12V98 wrote:
Lantley wrote:
2112 wrote:
I calculate it this way:
6340-2840=3500lbs. This is your rear axle limit
3500-200=3300lbs. Subtract 200lbs for the hitch
12000 X 0.25=3000. Guesstimated pin weight if the 12,000lb trailer is loaded to the max

3300-3000=300. You have 300lb margin on your rear axle.

I thought the pin weight was taken at 20% of gross weight not 25%.
12000 x .20= 2400 3300-2400=900


Have you ever actually weighed your 5er fully loaded? Many are 25% pin as my last two DRV's have been.

You and I know DRV's are very nice rigs, however they are also heavier than most. I don't doubt DRV's have 25% pin weights but the OP was not referring to a DRV. I also imagine DRV are at least 5% heavier than most comparable size RV's.
19'Duramax w/hips, 2022 Alliance Paradigm 390MP >BD3,r,22" Blackstone
r,RV760 w/BC20,Glow Steps, Enduraplas25,Pedego
BakFlip,RVLock,Prog.50A surge ,Hughes autoformer
Porta Bote 8.0 Nissan, Sailun S637

Cummins12V98
Explorer III
Explorer III
GVWR is ONLY their licensing and to keep the truck in a certain classification. Stay at or under your axle ratings and all will be fine. Be sure your trucks tonnage covers the weight on it's tires.

If you add to over 12k you most likely will need bags.
2015 RAM LongHorn 3500 Dually CrewCab 4X4 CUMMINS/AISIN RearAir 385HP/865TQ 4:10's
37,800# GCVWR "Towing Beast"

"HeavyWeight" B&W RVK3600

2016 MobileSuites 39TKSB3 highly "Elited" In the stable

2007.5 Mobile Suites 36 SB3 29,000# Combined SOLD

Cummins12V98
Explorer III
Explorer III
Lantley wrote:
2112 wrote:
I calculate it this way:
6340-2840=3500lbs. This is your rear axle limit
3500-200=3300lbs. Subtract 200lbs for the hitch
12000 X 0.25=3000. Guesstimated pin weight if the 12,000lb trailer is loaded to the max

3300-3000=300. You have 300lb margin on your rear axle.

I thought the pin weight was taken at 20% of gross weight not 25%.
12000 x .20= 2400 3300-2400=900


Have you ever actually weighed your 5er fully loaded? Many are 25% pin as my last two DRV's have been.
2015 RAM LongHorn 3500 Dually CrewCab 4X4 CUMMINS/AISIN RearAir 385HP/865TQ 4:10's
37,800# GCVWR "Towing Beast"

"HeavyWeight" B&W RVK3600

2016 MobileSuites 39TKSB3 highly "Elited" In the stable

2007.5 Mobile Suites 36 SB3 29,000# Combined SOLD

Cummins12V98
Explorer III
Explorer III
Taxman2436 wrote:
OK, so the rear GAWR is 6340 and the RAW is 2840. So, it appears the 12000 for the loaded trailer would be OK, but would I be pushing to the limit?


I towed a 12k Loaded 5er with my 98 2500 CUMMINS/RAM with NO air bags for modifications to the suspension. You will be just fine!!!
2015 RAM LongHorn 3500 Dually CrewCab 4X4 CUMMINS/AISIN RearAir 385HP/865TQ 4:10's
37,800# GCVWR "Towing Beast"

"HeavyWeight" B&W RVK3600

2016 MobileSuites 39TKSB3 highly "Elited" In the stable

2007.5 Mobile Suites 36 SB3 29,000# Combined SOLD

JIMNLIN
Explorer
Explorer
Taxman2436 wrote:
OK, so the rear GAWR is 6340 and the RAW is 2840. So, it appears the 12000 for the loaded trailer would be OK, but would I be pushing to the limit?

AS another poster says the truck will have a 3500 lb in the bed payload (6340 minus 2840 = 3500 lbs over the rear axle. I assume the 2840 lb number is a actual scaled weight.
Just stay under rawr that way your legal from a dot ticket nor will you face any civil lawsuit for exceeding a gvwr/payload sticker. Some rv folks like to scare others with civil lawsuit theory for exceeding a gvwr payload sticker.

Short bed truck ?
Depends on trailers front corner profile...and placement of the hitch in the bed. Newer trailers have a notched/rounded front corners made for short bed trucks and eliminates the need for a sliding hitch.
Also pin placement zero over the trucks rear axle will help make more cab to trailer front cap distance while turning.
"good judgment comes from experience, and a lot of that comes from bad judgment" ............ Will Rogers

'03 2500 QC Dodge/Cummins HO 3.73 6 speed manual Jacobs Westach
'97 Park Avanue 28' 5er 11200 two slides

Grit_dog
Navigator
Navigator
Didnโ€™t even get through 2 pages before the liability lawsuit paranoia came up.
Nice work team!
2016 Ram 2500, MotorOps.ca EFIlive tuned, 5โ€ turbo back, 6" lift on 37s
2017 Heartland Torque T29 - Sold.
Couple of Arctic Fox TCs - Sold

rhagfo
Explorer III
Explorer III
Taxman2436 wrote:
Thank you all for your help! Iโ€™m told that I should have a sliding hitch with the short bed. Is a gooseneck hitch a possibility?


Goose Box is the only Lippert approved goose neck hitch.
Russ & Paula the Beagle Belle.
2016 Ram Laramie 3500 Aisin DRW 4X4 Long bed.
2005 Copper Canyon 293 FWSLS, 32' GVWR 12,360#

"Visit and Enjoy Oregon State Parks"

rhagfo
Explorer III
Explorer III
Taxman2436 wrote:
I have a 2019 Ford F-250 6.7l diesel. Iโ€™m looking at a Grand Design 320MKS but want to make sure my truck can haul it. According to the brochure the trailer is 10,721 UVW. According to Fords towing guide the truck will tow 14,800 lbs. Iโ€™m thinking that if it will I may need to beef up the rear suspension. Also, Iโ€™m not sure how โ€œUVWโ€ relates to the actual weight I will be towing. Also looking for hitch recommendations.
Thanks for any help provided.

Lenny


Taxman2436 wrote:
OK, so the rear GAWR is 6340 and the RAW is 2840. So, it appears the 12000 for the loaded trailer would be OK, but would I be pushing to the limit?


Well here are your specs for the trailer.

UVW1 10,721 lbs
Hitch Weight1 2,104 lbs
GVWR 13,995 lbs
Carrying capacity 3,274 lbs

Well, the unloaded weight is 10,721 lbs, and the carrying capacity is 3,274 so if just weekending and vacations likely not going to use all that carrying capacity. I will say an estimate of 1,300 lbs of stuff is a bit light. Lets say you get to 12,500# for the 5er. Now 20% of that is 2,500 lbs.
Now rear axle GAWR 6,340 and GAW 2,840 (is this with all normal camping stuff in the truck?) 6,340 - 2,840 = 3,500 now 3,500 - 2,500 = 1,000 lbs of remaining axle capacity.

Now the catch all what is the payload on the door sticker of your truck? About 2019/2020 Ford and GM increased the GVWR of labeled F250 / 2500 so you may have enough payload.

If you don't have enough payload, you put yourself in legal limbo. Not likely to get a ticket, but could be sued by hungry lawyer even if not your fault in a crash. I towed 1,200# to 1,700# over GVWR for several years, but within axle ratings. I just got too nervous and got a Ram 3500 CTD DRW.
Totally your choice.
Russ & Paula the Beagle Belle.
2016 Ram Laramie 3500 Aisin DRW 4X4 Long bed.
2005 Copper Canyon 293 FWSLS, 32' GVWR 12,360#

"Visit and Enjoy Oregon State Parks"

Grit_dog
Navigator
Navigator
Taxman2436 wrote:
OK, so the rear GAWR is 6340 and the RAW is 2840. So, it appears the 12000 for the loaded trailer would be OK, but would I be pushing to the limit?


Youโ€™re not pushing anything to any limit with that trailer.
2016 Ram 2500, MotorOps.ca EFIlive tuned, 5โ€ turbo back, 6" lift on 37s
2017 Heartland Torque T29 - Sold.
Couple of Arctic Fox TCs - Sold

MFL
Nomad II
Nomad II
No, you don't need a heavy/expensive sliding hitch. The newer FWs are designed for the newer standard bed trucks, such as the Ford 6' 9" bed.

If you can turn your TT short/ back it in tight spaces, a FW will be just as easy.

If you mean a gooseneck adapter added to your pinbox, not a good choice.

Jerry

Taxman2436
Explorer
Explorer
Thank you all for your help! Iโ€™m told that I should have a sliding hitch with the short bed. Is a gooseneck hitch a possibility?
Taxman2436
Sturbridge, MA
2022 Ford F350 6.7L Diesel
2023 Grand Design Reflection 320 MKS

Lantley
Nomad
Nomad
2112 wrote:
I calculate it this way:
6340-2840=3500lbs. This is your rear axle limit
3500-200=3300lbs. Subtract 200lbs for the hitch
12000 X 0.25=3000. Guesstimated pin weight if the 12,000lb trailer is loaded to the max

3300-3000=300. You have 300lb margin on your rear axle.

I thought the pin weight was taken at 20% of gross weight not 25%.
12000 x .20= 2400 3300-2400=900
19'Duramax w/hips, 2022 Alliance Paradigm 390MP >BD3,r,22" Blackstone
r,RV760 w/BC20,Glow Steps, Enduraplas25,Pedego
BakFlip,RVLock,Prog.50A surge ,Hughes autoformer
Porta Bote 8.0 Nissan, Sailun S637

Lwiddis
Explorer II
Explorer II
Ok with a 300 pound margin on the TV rear axle with a 12000 pound 5er? Not me!
Winnebago 2101DS TT & 2022 Chevy Silverado 1500 LTZ Z71, WindyNation 300 watt solar-Lossigy 200 AH Lithium battery. Prefer boondocking, USFS, COE, BLM, NPS, TVA, state camps. Bicyclist. 14 yr. Army -11B40 then 11A - (MOS 1542 & 1560) IOBC & IOAC grad

Grit_dog
Navigator
Navigator
Zero capacity or towing concerns with that setup. Essentially a perfectly matched combo on all accounts.
2016 Ram 2500, MotorOps.ca EFIlive tuned, 5โ€ turbo back, 6" lift on 37s
2017 Heartland Torque T29 - Sold.
Couple of Arctic Fox TCs - Sold

MFL
Nomad II
Nomad II
Your truck will work for that trailer. Your springs will likely be your weakest link, but still within spec. If your truck seems to squat more than you like, you can add aftermarket support, to restore to level.

If your truck has the FW prep kit (puck system) a B&W 3300 is a great hitch choice for your truck.

Jerry