Tachdriver wrote:
I had the sidekick grill with a QD adaptor connected to a hose which was QD'ed to the trailer fitting.
My TT had the two bottles, the regulator going to the QD fitting. When I replaced the grill I removed the fitting from the sidekick and installed it on the weber, and yes I had to remove the regulator, it works and is hot as I need it.
If you have a class "A" or "C" you may need other fittings that I am not familiar with.
Others mentioned getting a small propane bottle but that defeats the purpose of using your 60-150 pounds of propane you are carrying around. Too bad I didn't take pictures.
This sounds like the plan. I currently have the quick connect attached to the propone hose that I pull out of the TT wall to connect to my Sunbeam Sidekick grill. So all I have to do is remove the male fitting from the Sidekick, remove the regulator from the Weber and screw the male connector onto the Weber and call it a day??? Sounds too easy? Have to missing something or more importantly a part. If so, I'll pick up a stand for the Weber and I'll be good to go.