Valve Stems
These do not look like metal valve stems to me. I just noticed it tonight. I was preparing to pump the pressures up on the G614s since the dealer only put 70-80 psi per wheel. Am I correct or is t...
Forum Discussion
Thank you. Just wanted to confirm before I call them tomorrow. I am already supposed to call them to discuss why the Eqau-Flex brackets were screwed up. Like a thread from a month or two ago, two of the hangers on the back axle were pointing down. I just got that fixed tonight. That's when I noticed the valve stems.
Worst part of this whole thing is, I emailed the owner last week with two requests. 1. Leave the camper plumbing pressurized and don't winterize it since its getting so close to spring. 2. Make sure the tire shop installs metal stems in those wheels for the high pressures.
Worst part of this whole thing is, I emailed the owner last week with two requests. 1. Leave the camper plumbing pressurized and don't winterize it since its getting so close to spring. 2. Make sure the tire shop installs metal stems in those wheels for the high pressures.
