vinyl on inside of exit door cracking
Has anyone else had the vinyl on the inside of the RV exit door to start cracking. It appears that whatever the thin layer of vinyl is attached to is contracting and expanding causing the vinyl to cra...
Forum Discussion
FINIDHED THE DOOR REPAIR TODAY! Only problems I ran into replacing the door vinyl skin was thinking I could use 1/8" vinyl instead of the 1/16" that the factory used. After cutting the 1/8" sheet which was $30., I found that it was too thick to fit into the frame. My door has an all steel frame so I could not adjust it. I had to purchase the 1/16" sheet vinyl. It fit perfectly. I also purchased the wrong glue, contact cement, which melted the Styrofoam core of the door. Fortunately I tried it on a small spot. The glue I needed was the glue used to put up foam board paneling, it worked good. Anyway the door looks new and I think I might have saved $400-$500, the price of a new door unit. I sure am proud of me today.
