Weight distribution hitch question

Question

I have pieces to a draw Tite wd setup. I only have 1 bar and the snap up brackets that are still attached to the used travel trailer I purchased. On the bar, it says 600 lbs max tongue weight (2 bars). My question is, is this a 600 or 1200 lbs set up. I have a picture of it but can't seem to figure out how to post it. ?????

whiteeye42 · Answer

in my opinon throw what you have away and go buy a new set up because you will never get a single bar to match the old bar because the new bar will be stronger

terryallan · Answer

Or just buy 2 new bars. And to answer you question. If it has 600lb stamped on it. Then it is a 600lb setup. Another bar won't make it a 1200lb setup.

abbysdad2006 · Answer

Thank you. I'm going to look for a new set up with sway control.Anyone buy from etrailer?  Wondering how they are to work with?

drsteve · Answer

I have a Husky Centerline TS and it works very well. Others have good experiences with the Blue Ox sway pro, and Reese dual cam setups. Whatever you choose, make sure to buy based on the actual tongue weight of the loaded trailer, rather than the dry tongue weight given in the brochure.

whiteeye42 · Answer

i have brought several thing from Etrailer and have never had a problem with them

Forum Discussion

Weight distribution hitch question

About RV Tips & Tricks

Related Content

Weight Distribution Hitch Question

Weight distribution hitch question

weight distribution question

Weight Distribution Setup Question

Weight distribution