Weird water flow problem... help!
Getting the Class C ready for our next trip (leaving this Friday), so after changing the oil/filter and air filter in the generator I decided to flush the fresh water system with a small dose of bleac...
Forum Discussion
Check the aerators for gunk/debris?
If the flow is stopped by a clog there, the pump would not receive a call for water once the line is full to that point. Then the pump would not run.
Something in the line somewhere.
Outdone again by that Dang Crusty Biscuit and his lightening-fast replies! ;)
Well done, Sir. I salute you, too.
If the flow is stopped by a clog there, the pump would not receive a call for water once the line is full to that point. Then the pump would not run.
Something in the line somewhere.
Outdone again by that Dang Crusty Biscuit and his lightening-fast replies! ;)
Well done, Sir. I salute you, too.
