โJul-27-2019 11:12 AM
โJul-31-2019 10:35 AM
โJul-30-2019 07:23 AM
โJul-30-2019 12:42 AM
โJul-29-2019 01:05 PM
โJul-29-2019 09:25 AM
โJul-28-2019 04:38 AM
โJul-27-2019 10:18 PM
โJul-27-2019 05:54 PM
โJul-27-2019 04:12 PM
โJul-27-2019 03:38 PM
โJul-27-2019 03:38 PM
โJul-27-2019 03:32 PM
Lynnmor wrote:
The only problem with jacking under the axle is many are made with ridiculously thin tubing and they can be bent.
โJul-27-2019 03:22 PM
โJul-27-2019 03:05 PM
wa8yxm wrote:
Some Folks say you should never have the wheels off the ground.. Some truth to that "Because the suspension is designed to hold the trailer up not the wheels/axles" (pure bunk)
The reason you should never have the wheels off the groung is the STABLIZER jacks can pretzel on you (Seen it happen) but with proper supports (As shown in the photos) no problem at all.. (Thankfully it was just the front stablizers on a trailer that pretzeled. so the tongue jack handled the load once it was properly set up Could have been worse) Oh. I drive a class A.. (So you know it was not mine)