2kw Inverter + 4 GC2 6v batteries = wiring???
I now have 4- 6volt GC2 215 batteries, PD9270 converter charger, and and a ProSine 1800 watt inverter (2800 watt surge) and want to start wiring. I have a quantity of 2 AWG wire on a spool, a suppl...
Forum Discussion
Thank you all for the input and corrections!
It's still raining but supposed to let up shortly.
I'm planning to get metal strapping cut and weld some reinforcement strut on the bottom of it to install on the tongue to put the truck tool box on it.
Right now I'll just mock it up so I can install batteries and use thin wire to work out the proper lengths and ends needed. I can then take those pieces with me tomorrow to cut and have the ends installed at the shop and bring home "ready made" cables ;)
I am thinking about adding a TSC Horse Stall Mat, cut to shape, under the truck tool box to act as a cushion for the batteries. I don't have enough height in the box for a piece of wood or anything inside.
Here's the box I picked up:
12 inches wide "just fits" ;)
Should look something like this when finished (not my pic)
Link to his video for anyone interested: Youtube link
It's still raining but supposed to let up shortly.
I'm planning to get metal strapping cut and weld some reinforcement strut on the bottom of it to install on the tongue to put the truck tool box on it.
Right now I'll just mock it up so I can install batteries and use thin wire to work out the proper lengths and ends needed. I can then take those pieces with me tomorrow to cut and have the ends installed at the shop and bring home "ready made" cables ;)
I am thinking about adding a TSC Horse Stall Mat, cut to shape, under the truck tool box to act as a cushion for the batteries. I don't have enough height in the box for a piece of wood or anything inside.
Here's the box I picked up:
12 inches wide "just fits" ;)
Should look something like this when finished (not my pic)
Link to his video for anyone interested: Youtube link
