2kw Inverter + 4 GC2 6v batteries = wiring???
I now have 4- 6volt GC2 215 batteries, PD9270 converter charger, and and a ProSine 1800 watt inverter (2800 watt surge) and want to start wiring. I have a quantity of 2 AWG wire on a spool, a suppl...
Forum Discussion
2oldman wrote:
Good luck being 'flexible' with 4/0 ! :)
LOL!
Now to confirm the grounds.
NOTHING gets ground wires to the battery bank, except the shunt (when added later). It ALL goes to the frame ground? Can it go to different locations on the frame, or best to all be at the same point?
What about inverter? I've read different things about ground it and not grounding it, floating grounds, etc....what is correct?
A/C side is grounded to the ATS, and distribution box, right? They are both grounded to the trailer frame, too?
The "floating ground and problem with a pedestal that is miswired or damaged" has me uncertain. House AC, ground and bond in box and one point to outside ground rod, carry grounds from any other boxes back to that first bonding bar, not in any addon boxes. That I know, but campers...?
