3M/Diamond Shield Removal

Go online and check out 3 M products, they have good products may have something that will work, or you could try a hair dryer

2x On the hair dryer. Get the surface nice and hot and peel a corner away, then point the hot air from the dryer at the back sticky side of the sticker and gently pull it off as you feel the glue release. Finish up with one of the glue removal products from 3M as mentioned or "Goo-Be Gone". Try a little of the removal product on a hidden spot to make sure it doesn't mess up the paint.

Heat gun and plastic razor blades for the film. And for the glue..."Citrus Squeeze" of "Orange Squeeze" by CA Sents air freshener. Don't knock it until you try it. Amazing how many things it will remove and you smell good afterwards.

You folks just helped another forum member! Me! Thank you!