5TH Wheel Landing Gear Problem --- Need Help
Picked up my big 2009 Grand Junction 5ver from the desert winter storage yard today. Unlocked the raise/lower flap door to press the rocker switch up to raise the rig a bit for hookup to truck. The ro...
Forum Discussion
We have just now cut a hole through the bedroom floor to access ours. Otherwise, you need to have access from the ground (but the front of the RV is now in the lowest position position posible, limiting outside access).
We've had trouble with the motorized side (driver's side), but this is the first time we've had to deal with the passenger side. The rod coming from the passenger side into the squared piece that rotates had been sheared off. The bolt is still in place! So...do we have anyone who knows the replacement part number for what I'm talking about?
Or can we fish out the other end of the rod (still held in place by the bolt, and weld it together? Will it be strong enough?
Thanks for your input!
We've had trouble with the motorized side (driver's side), but this is the first time we've had to deal with the passenger side. The rod coming from the passenger side into the squared piece that rotates had been sheared off. The bolt is still in place! So...do we have anyone who knows the replacement part number for what I'm talking about?
Or can we fish out the other end of the rod (still held in place by the bolt, and weld it together? Will it be strong enough?
Thanks for your input!
