Forum Discussion
Huntindog
Dec 24, 2014Explorer
jcarlilesiu wrote:That's what I did. Don't get sidetracked into long 12 volt wire runs. I mounted my Inverter 3' from \ from the batteries and used really thick cables Over 100.00 worth. It still has a little voltage drop.2oldman wrote:jcarlilesiu wrote:Why to the converter location?
..install a Go Power! 1000W inverter in the front compartment near the batteries. I will run a 120V wire to the existing converter location and install a ATS.
That is where my panel is located and I want to hardwire the inverter/ATS into the existing circuits.
That would be the easiest way to get at the house 120V circuit, right?
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,198 PostsLatest Activity: Feb 12, 2025