Atwood 8535 blowing fuses
I have an Atwood 8535 -IV- DVLP. It turns on and the blower motor runs like it should, then the ignitor lights fire. It runs for about 5 seconds and then blows the fuse so somewhere the voltage is bu...
Forum Discussion
If it does not blow until the burner ignites, it is probably the wires going to the Hi Limit switch. The wires are burner/melted to the burner chamber and when it heats up, it causes the wires to melt slightly and blows the fuse. The wires on this model are extremely close to the burner. Doug
