Atwood Furnace issue-need suggestions Please.
1996 Damon Intruder has an 8535-lll Atwood Furnace in it. It has always worked perfect but went out the other day and turned it on. Furnace fired right up as always and fan run for a bit and then i...
Forum Discussion
Locate the circuit board, disconnect and clean multi-wire connector.
Possible flame sensor is not in flame or bad circuit board.
Compare circuit board in water heater with furnace. If same swap them to see if it works.
Possible flame sensor is not in flame or bad circuit board.
Compare circuit board in water heater with furnace. If same swap them to see if it works.
