obscenic wrote:
Old-Biscuit wrote:
Old problem....new board didn't correct.
Yup, exactly.
Old-Biscuit wrote:
OK but is the t-stat any good
Brand new
Old-Biscuit wrote:
You are losing power at/to t-stat (loosing program/time/date etc.) so either new wiring has a scape on insulation and is grounding out, a loose wire nut, poor connection OR old relay is faulty.
T-stat doesn't get power from wires, it has batteries. There's only two wires going to t-stat; t-stat just opens or closes them to connect 12v back to the furnace.
Then why do you loose programming on t-stat?
5. My programmable thermostat loses all of it's programming, time, date etc.
