Slownsy
Jul 19, 2023Explorer
Atwood Furnace
Atwood hydro flame model 2334. Furnace did not appear to be heating properly, came home and washed FW then tried to start it again, but with no success, removed outside cover and found som water inside being splattered around by the blower and combustion wheel. Vacuumed and blew it out and tried again. I managed to get it to start again but only for about 4-5 seconds cut out and did again 3times before stopping. Red light flash 2 times for a soft lockout ignition failure. But it started as I could hear the flame roar and feel the exhaust being hot before cutting out. I suspect the flame sensor? . I also found some evidence of wasp nests so trying to remove gas valve etc but can’t find a socket to fit the screws at back which holds it in. Size of socket please and am I on the right track.
As I am in Australia I am in a bit of a pickle.
Thanks for any help
Frank.
As I am in Australia I am in a bit of a pickle.
Thanks for any help
Frank.