Atwood water heater drain plug tightening
Please correct me if I'm wrong anywhere. So I've got some "OEM" atwood plugs for my water heater that appear to be without any taper (I've read this is apparently normal for what I'm told these ar...
Forum Discussion
JimK-NY wrote:ewarnerusa wrote:
I have always had to use tape to get a good seal between nylon plugs and my Atwood water heater. It seems to me like the nylon plugs would not need tape, but every season when I go over the system and don't tape the plug, water slowly leaks from the plug. Depressurize, remove, tape, reinstall plug, no leak. I've gone through a handful of plugs over the years, so it's not like it was one janky one that leaked.
That has been my experience exactly. Old or new plugs have made no difference. Two or three wraps of thin teflon tape ends the leaking.
Nope, GDE says that won't work. Doesn't seal threads...lol.
