Atwood water heater igniter, constant?
So this is my first auto-piezo-igniter water heater. When I initially turn on the igniter, it clicks real fast. Both after the pilot is lit and the burner is on, it continues to ignite (click) at ...
Forum Discussion
The tip of the ignitor probe should be 1/8in from the burner....
Check the section "how to clean ignition module
http://bryantrv.com/docs2/docs/operating/atwood1.pdf
If the thermocouple is not working the pilot will not remain on,
Jim
Check the section "how to clean ignition module
http://bryantrv.com/docs2/docs/operating/atwood1.pdf
If the thermocouple is not working the pilot will not remain on,
Jim
