Awning switch wiring - Weather Pro
I have a A&E Weather pro on a 2005 Southwind. I removed the controller box because it was cr-- . Now I have no power to the main roller switch. There were three wires going from the box to the roller ...
Forum Discussion
SCVJeff wrote:
That also defeats all the fail-safe devices, and that becomes a liability for a shop to work on it, bla-bla..
You could probably make it work with a DPDT ON (mom)-OFF-ON (mom) rocker if that's a quest.
What Fail safe devices?????
The roof/arm wind sensor is an option and the Ignition interlock is an option. Doug
