Black Tank Dump Valve
When I dump a full black tank, the valve opens very easy, no problem. I flush the tank for 5 to 10 minutes, then I close the valve for 5 minutes to let it partially fill. When I then pull the handle t...
Forum Discussion
IAMICHABOD wrote:
I found that lubricating it during a dump as in this video works.
I have used this method for many years to lubricate my valves and have had no problems with them at all.
This Video will show how to do it
I did the same only different. I drilled, tapped and screwed in grease zerks. Then lubed with chassis grease. NO! the seals are NOT rubber.
Richard
