Can someone help design a 5 volt circuit
Yes I realize this is an RV forum but the post is related to wiring on my tow vehicle. I have a diagram below of what I am trying to do. But I will spell it out as best as I can first. My hope is that...
Forum Discussion
What is wrong with pulling codes while driving down the road?
Why does it need to be in neutral-park?
I am really inclined not to mess too much with the factory neutral safety circuit.
Consider fabricating a bracket to hold a separate momentary switch that is closed when the lever moves to park.
The two hold down screws for the switch could also hold the bracket. As that lever moves forward the switch closes.
N-S switch is the grey half moon shaped object just to the left of middle picture.
Close up:
Possibly a switch like this: https://www.amazon.com/DIYhz-waterproof-Momentary-Roller-Switches/dp/B07JL3Y36P
Why does it need to be in neutral-park?
I am really inclined not to mess too much with the factory neutral safety circuit.
Consider fabricating a bracket to hold a separate momentary switch that is closed when the lever moves to park.
The two hold down screws for the switch could also hold the bracket. As that lever moves forward the switch closes.
N-S switch is the grey half moon shaped object just to the left of middle picture.
Close up:
Possibly a switch like this: https://www.amazon.com/DIYhz-waterproof-Momentary-Roller-Switches/dp/B07JL3Y36P
