Change in Trojan users Guide
Noticed a change in the charging and absorb voltages in the Trojan Users Guide. Both are a bit higher than before. Page 13. Trojan Users Guide
Forum Discussion
mena661 wrote:landyacht318 wrote:It was like 16.2V before so I'm thinking it's not. I know I've never needed that much voltage.
So pump them upto 16.74v to get 100% ????
2.79 Volts per cell! Anybody else think this is a typo?
One of the tables says equalize at 15.5 though. No idea what that last jump in voltage is in the profile. Looks like the new "finish" stage" at the end of the absorption stage some profiles now have, but those don't go that high.
finish stage is usually same voltage as equalize only it stops. To equalize you continue the finish stage for extra time. Compare
http://pdf.wholesalesolar.com/battery-folder/charging_instruction_2011_2.pdf
