Just wondering if anyone has found an alternative to those silly pot-metal compartment keyed locks and twist locks. Not so much a different design as it would have to fit the holes that are already there, but a better quality lock that dosen't feel like it's gonna break off everytimg you use it. Mayby something that's all steel, not pot metal or an aluminum casting.Grumpy

The security problem is not with the locks...it's with the compartment door itself.They are very thin and weak and can be compromised easily with a simple screw driver or any pry tool...doesn't matter what kind of lock you have.

Not concerned with the security aspect. Pair of vice-grips would probably pull em right out. Just looking for something with a bit more quality. May look to some of the high end tool chests to see what they use.Grumpy

Answered my own question. Googled and found MSC Industrial Supply. Carry Made In USA steel locks.Grumpy

Just curious what part number from MSC did you use. I found two "automotive grade" locks from Amazon which are a step up for me because the key is a lot less flimsy than the CH751 one.This is not for security, because a long screwdriver is always a "master key", but it means that the key is less likely to break off in the lock.

Compartment Locks | Good Sam Community

downtheroad
Explorer
Aug 08, 2013
The security problem is not with the locks...it's with the compartment door itself.

They are very thin and weak and can be compromised easily with a simple screw driver or any pry tool...doesn't matter what kind of lock you have.
Grumpy374
Explorer
Aug 08, 2013
Not concerned with the security aspect. Pair of vice-grips would probably pull em right out. Just looking for something with a bit more quality. May look to some of the high end tool chests to see what they use.
Grumpy
Grumpy374
Explorer
Aug 08, 2013
Answered my own question. Googled and found MSC Industrial Supply. Carry Made In USA steel locks.
Grumpy
96Bounder30E
Explorer II
Aug 08, 2013
Moved from DIY
mlts22
Explorer
Aug 09, 2013
Just curious what part number from MSC did you use. I found two "automotive grade" locks from Amazon which are a step up for me because the key is a lot less flimsy than the CH751 one.

This is not for security, because a long screwdriver is always a "master key", but it means that the key is less likely to break off in the lock.
CentralCoastCam
Explorer
Aug 09, 2013
Take a look at this site;
http://www.rvlocksandmore.com/Global-Link-RV-Locks-and-Keys#.UgRxFMS9KSM

Depending on the brand of door lock you have, you can use the same key for your door and the compartments.
Grumpy374
Explorer
Aug 09, 2013
I'm looking at the series of Tubular Keyed cam locks. Looks like it's deceant quality, and I've never heard of a tubular key breaking off.
Grumpy
Dr_Quick
Explorer II
Aug 09, 2013
I got some locks from my local RV dealer that use a "round" key. Got them all keyed alike. And no one can open them unless they have the identical "round" key. A screw driver can not be used in them as there is no slot.

Do not remember the brand, and since I am on the road, I do not have RV place catalog.
Bumpyroad
Explorer
Aug 09, 2013
I replaced all of my 751s on my new TT with the round key type. at least every body out there doesn't have a duplicate of my key, only about 1/6th of the round key owners.
and yes, I saw the BS article years back about the Bic pen opening them. I would be glad to have somebody accept my $100 challenge their pen against my 751. :)
bumpy
Mello_Mike
Explorer
Aug 10, 2013
I recently made the switch from the CH751 to tubular cam locks. The full details can be found here:

Tubular Cam Lock Install

Good luck!