Converter
I need a new converter. Mine has overheated and the fan is not working. I currently have WFCO 35 AMP WF-8835. I am looking to replace it with something better. Looking at the Progressive Dynamics PD92...
Forum Discussion
tenbear wrote:
I replaced my old Magnetek converter with a PD9260, and also replaced the #8 wire between the converter and battery with #4. Since you are planning to switch to 2 6v next year, I think you would be better off with more than a 45 Amp converter.
I agree with both suggestions. When you said it was 15 ft. to the battery I wondered if the wire was heavy enough.
