Dexter bearing adjustment procedure
I totally get NOT using the EZlube fitting (ruined some brakes), Timken parts, and annual service. What I don't get is the conflicting methods being used to set the zero backlash on the bearing, i.e....
Forum Discussion
OK, I am just trying to make sure I did this correctly WITH THE CLIPS NOT WITH CASTLENUT AND COTTER PIN.
https://www.dexteraxle.com/resources/videos/bearing-maintenance
I used a torque wrench not a 12 inch wrench as shown in video because I have damaged shoulders (need leverage to get to 50 ft-lbs, I can't put 50 lbs of force on a 12 inch wrench).
https://www.dexteraxle.com/resources/videos/bearing-maintenance
I used a torque wrench not a 12 inch wrench as shown in video because I have damaged shoulders (need leverage to get to 50 ft-lbs, I can't put 50 lbs of force on a 12 inch wrench).
