Dexter bearing adjustment procedure
I totally get NOT using the EZlube fitting (ruined some brakes), Timken parts, and annual service. What I don't get is the conflicting methods being used to set the zero backlash on the bearing, i.e....
Forum Discussion
Thanks Lynmor. There is play in all the nuts under the clip, not much, but some. So I guess I did it OK.
I've serviced various bearings on TT and boat for 20 some years, just never ran into the 50 ft-lb and the hand tighten bit and the clip retainer, thus the source of my worry.
Its not just that your tire falls off. Its when your tire falls off coming down the west side of Monarch Pass in CO. Never happened to me, and I don't want it to ever happen. Ever.
I've serviced various bearings on TT and boat for 20 some years, just never ran into the 50 ft-lb and the hand tighten bit and the clip retainer, thus the source of my worry.
Its not just that your tire falls off. Its when your tire falls off coming down the west side of Monarch Pass in CO. Never happened to me, and I don't want it to ever happen. Ever.
