Disconnect load before stopping generator?
The topic says it all. This is in the rule book for several brands of generators. Its not in the book for my Yamaha, but Champion and Predator both mention it. So my question is... lets say you run...
Forum Discussion
Only thing I can think of
Is that there was a temperature control connection for the AGS right that says we need the a/C start the genny
Doesn't that same control keep the genny running until a low temp setting has been reached ? And maybe even for a specific time duration
Which means the a/C would either be off, or at a minimum blower load,
Not running the compressor,
Maybe somebody here can give us an answer
Is that there was a temperature control connection for the AGS right that says we need the a/C start the genny
Doesn't that same control keep the genny running until a low temp setting has been reached ? And maybe even for a specific time duration
Which means the a/C would either be off, or at a minimum blower load,
Not running the compressor,
Maybe somebody here can give us an answer
