Do I need a whole Roof Over?
Recently here in the Pacific Northwest we had a lot of rain, and I recently noticed water discoloration in the rear bedroom, it looks like rust if you see the photos you can see what I mean, I checked...
Forum Discussion
oldbeek wrote:
I contacted "EDPM Coatings" on the net. 2 part EDPM coating will bond with the original edpm roof. When coated there are no more black streaks. A lot of prep is required. Removed all old caulk and scuffed all other products with 100 grit sand paper. Applied it to all vents and covers to stop future UV damage. Applied it over the moldings on the sides and caps. Applied past those moldings by 1/2 inch onto the caps and sides. Remember that 1/2 inch was scuffed with 100 grit sand paper. There were old damaged areas that were repaired with Eternabod tape. EDPM bonds to that also. No more seams no caulk, a total EDPM roof. Cost? $70.00 gallon and lots of labor.
A big X2 on EPDM's Liqiud Roof.
Redid mine last season & very happy with how it turned out!
