Dometic Fridge not working
Hello: Came back from out of town, and the fridge and freezer portion were not working. Now, I do have power, in that the light comes on. Typically we run on electric power. So on electric, I do...
Forum Discussion
dougrainer wrote:
NEVER a control board. All they do is switch between LP and 120 and monitor the cold for the Thermister.
Got it.
ARE you POSITIVE you put the correct wattage Heat Element in? They are not all the same. In extreme rare cases the heat element tube is not attached securely to the burner flue. NO problem on a Dometic as Dometic has 2 heat element sleeves. If you suspect this you just move the heat element to the other sleeve. To verify the Heat Element wattage you either look at its stamped display on the element or you do a AMP check. The amp check will tell you the wattage. Doug
OK, I remember removing the old element from a small tube inside the pipe. When you say sleeve, I guess I'm not understanding what you are meaning? As for the wattage, I know there is something stamped on the pipe itself, but I will have to check back to see if what they gave me from the RV place is the same as what is stamped on the pipe.
