Dometic Refrigerator quit
My refrigerator quit and I have determined that it needs a Dinosaur board.. However I haven't been able to find out which board to buy for a RM 3962.Any help is appreciated..
Forum Discussion
- Send an email to Dinosaur Customer Service asking them for the correct part number. It likely takes the same board as the 3862. If you have the Dometic part number, you can cross reference it here.
Dutch_12078 wrote:
Go to this page and scroll down to Chart 3. Find your model number and match the Dometic part number to your existing board to see which Dinosaur board replaces it.
Thanks,been there My RM 3962 is not on the chart...RM 3862 is!
I have an e-mail in to Dinosaur,maybe they will know!- You're too quick for me! I noticed that, and rewrote my post above. Give it a try... ;)
T bone wrote:
Dutch_12078 wrote:
Go to this page and scroll down to Chart 3. Find your model number and match the Dometic part number to your existing board to see which Dinosaur board replaces it.
Thanks,been there My RM 3962 is not on the chart...RM 3862 is!
I have an e-mail in to Dinosaur,maybe they will know!
Ok, let us know how it works out...- http://rvcoolingunit.com/Dometic-PC-Boards-C288484.aspx?sid=298
- most likely a 3850712.01. dinosaur board with ignitor built in. How did you determine it needs a board. What symptoms?
- Which power module do you have?
3851331011
3851005011
Not sure Dinosaur Electronics makes a replacement board - looks like 3851005011
wasatchmtnatvr wrote:
most likely a 3850712.01. dinosaur board with ignitor built in. How did you determine it needs a board. What symptoms?
Checked for incoming power --good,,out from board--none..T bone wrote:
wasatchmtnatvr wrote:
most likely a 3850712.01. dinosaur board with ignitor built in. How did you determine it needs a board. What symptoms?
Checked for incoming power --good,,out from board--none..
The original Dometic board in my unit only has one fuse, but the Dinosaur replacement board has two - one regular glass fuse and one automotive blade fuse. When the blade fuse went out on mine I had no power at all.
If you determine that you really need the Micro P-711 board which appears to be used on some of the 3862 units, send me a PM. I have a brand new one I can send you - I ordered the wrong part. LOL
