Door works great but need advice
My rv door and locks work fine but on the interior side there is a long metal rod (about 2 inches) that needs to be pushed or pulled to lock or unlock the door from the inside. It hurts my fingers. Iv...
Forum Discussion
That button unscrews from the threaded rod it is connected to
You can remove it, and take it to the hardware store to find something that will fit over it, then maybe screw them together, or epoxy the knob to the pull button
Do you have an electronics surplus hobby shop in the area
They might have a supply of knobs that use 'set screws' to hold them to shafts
You can remove it, and take it to the hardware store to find something that will fit over it, then maybe screw them together, or epoxy the knob to the pull button
Do you have an electronics surplus hobby shop in the area
They might have a supply of knobs that use 'set screws' to hold them to shafts
